€ 155.99 Incl. VAT
The Radiomaster MT12 surface radio with EdgeTX.
10 inputs, 16 outputs (or 32 with an extra multi module), unlimited models, and plenty of options will make you love this transmitter.
You can choose between the 4-in-1 multimodule or ELRS version.
The MT12 comes without a battery. Please purchase your batteries separate.
Official RadioMaster EU repair & service center
Directly shipped from The Netherlands
Not as expected? Return your product within 14 days and get a full refund
Dutch/English/German/French speaking customer support
Buy directly at us and receive software & hardware support
The RadioMaster MT12 is the first Surface radio controller that is officially supported by EdgeTX, ExpressLRS and the Multi-module project.
Specifically designed for surface RC models, the RadioMaster MT12 features 10 inputs, the possibility to output 16 or 32 channels* to your rc model, adjustable tension for the steering wheel and trigger, a nano bay for expansion modules, a built-in charger, an AUX-port & headphone jack, an SD card slot, a big LCD display and many more!
The RadioMaster MT12 comes pre-installed with the opensource EdgeTX operating system. EdgeTX is famous for its high flexibility and many features.
Learn all about EdgeTX here: https://www.edgetx.org
EdgeTX is a fork of the famous OpenTX OS and currently the leading OpenSource software project to run on RC transmitters. EdgeTX is driving all ourr RadioMaster products.
the EdgeTX transmitter operating system gives you full control on all aspects of your transmitter. You are fully in control.
Set up multiple models, attach switches to custom functions, let the software take custom actions based on telemetry values.
Set up RF power output with LUA scripts. Adjust your controller settings with Lua Scripts. And many, many more features!
With EdgeTX, your imagination is the only limitation.
The RadioMaster MT12 is available in a version with a built-in ExpressLRS RF module or as a version with a built-in 4-in-1 MultiModule RF module.
ExpressLRS is an open-source, low-latency, and high-performance remote control communication protocol designed for radio-controlled vehicles and drones.
The 4in1 Multi Module is a 2.4GHz transmitter module which enables the RadioMaster MT12 to control many different receivers and models. This module runs on the famous multi-module firmware: https://www.multi-module.org/
Never run out of model banks with the MT12 rc controller. Add more models than you ever can own.
Adjust both your wheel tension and the trigger to your preference.
Enjoy a totally seamless and precise control of your model thanks to the 4 bearing setup of the steering wheel in combination with the famous hall sensor setup from RadioMaster.
With 10 physical inputs (6 multi position switches and buttons, 4 proportion input channels) and 5 trim buttons, you can control any model the way you want.
With ExpressLRS you will get 16 output channels.
With the 4in1 version you will get 16 or 32 output channels.*
*For 32 output channels you will buy a nano bay compatible 4in-1 multimodule seperately
The MT12 uses the Standardized button layout by RadioMaster. This makes switching to this transmitter a breeze for everyone that already owns another RadioMaster Transmitter.
Jump through all the EdgeTX menu’s with jus a few clicks, set up your model quickly and conveniently. Check all the telemetry data on your preferred way.
Every MT12 radio comes with both a Dual Switch and 4 way joystick expansion module.
Customize the setup of your radio with one of this modules, or just don’t install them if you don’t need them. It’s up to you!
Extend the possibilities of your transmitter. Add any 5 pins compatible Nano module to your transmitter to expand your transmitter. Install a Ranger Nano, a RadioMaster 4in1 or a TBS crossfire nano module. Or any other Nano module that is supported by EdgeTX!
The Radiomaster MT12 transmitter features a big battery bay. Our 5000mAh pack fits great in it, give you plenty of hours operating time. If you don’t want to use our 5000mAh 2S pack, you can insert our 18650 cells into the 8650 battery tray that is supplied with every transmitter.
With the built-in charger you can simply charge your batteries by connecting a USB-C wall charger.
*Batteries must be purchased seperately.
We recommend the RadioMaster 5000mAh pack or the RadioMaster18650 cells.
The MT12 features a DSC port for our trainer cable, a USB-C port to charge your transmitter battery, transfer files or update firmware, a SD card slot, a 3.5mm Headphone jack and an AUX-Port.
Illuminate your MT12 with customizable LUA scripts. Change the LED color according to telemetry or transmitter data.
The contents of your order depends on the version you buy. We offer the 4in1 version and the ELRS version.
The list below shows an overview of items included.
| Weight | 1400 g |
|---|---|
| Manufacturer | RadioMaster |
| MT12 version | MT12 4in1 + R85C Receiver, MT12 ExpressLRS + ER3C-I Receiver |
RadioMaster Boxer
RadioMaster Boxer
RadioMaster Zorro
RadioMaster TX16S
RadioMaster TX16S
RadioMaster TX16S
RadioMaster Boxer
Reviews
There are no reviews yet.